ISO 9001 Registered
PH: 716.875.3380

HFW’s Machining complements Coating, Finishing & Assembly Capabilities Providing ONE SOURCE Service

February 3rd, 2014
 Quick Links

Our Website 

HFW Services

 
 

   CNC Machining-Haas-Bowl

   How HFW’s One Source Solutions Help You!

Along with our machining capability, HFW has been providing weld overlays and thermal spray coatings for prolonged life and restoration of equipment used in highly corrosive atmospheres.

By providing one source service, our customers receive the confidence that one proven supplier will handle all the technical issues that come with properly preparing and finishing coated pieces of equipment.

Additional services include…

~ Dynamic Balancing
~ Stress Relieving
~ Precision Grinding
~ Superfinishing
~ Assembly
~ Project Management
 HFW Industries, Inc.

ISO 9001:2008 Registered

196 Philadelphia Street

Buffalo, New York 14207

Ph: 716.875.3380

Fx: 716.875.3385

E-mail: sales@hfwindustries.com

Over the last couple years, HFW has greatly expanded our machining capabilities – from the addition of new state-of-the-art CNC machinery to a growing team of highly skilled machinists.

Known for many years for high quality machining of mostly larger parts, we’ve grown to include CNC machining of a wider range of sizes and complexity, allowing us to expand our in-house capability for production and assembly work.

CNC Machining-Okuma Cell
(Pictured: Above- CNC cell/ Left- programming our Horizontal Machining Center.

 Below- turning of 48″ O.D. turbine shaft)

 Lathe-Turbine   Machining Capabilities Include:    ~ Turning

  • Lathes (13)- to 50″ Dia. Swing x 312″ Long
  • CNC (5)- to 37″ Dia. Swing x 200″ Long
   ~ Milling Centers

  • CNC Vertical Machining Centers (2)-  to 25″ x 60″ Table
  • CNC Horizontal Machining Center (1)- 36″ x 64″ Table
  • Bed Type Mill (1)- 32″ x 78″ Table
  • Horizontal Boring Mills/ Manual (2)- to 62″ x 68″ Rotary Table
  • CNC Horizontal Boring Mill (1)- 55″ x 63″ Rotary Table

   ~ Miscellaneous

  • Planers (2)- to 36″ x 96″ Openside
  • Radial Drill
   Whether it’s the manufacturing or restoration of equipment
or components, one piece or one-hundred- consider HFW
for your upcoming requirements!

Maybe you can improve print quality and lower costs by repairing your cylinders too?

July 27th, 2011

    Can you reduce  your cost of quality by repairing your offset-web press cylinders?

 

 

 Engineered Services for Print Cylinders include: 

  • Complete Plate & Blanket Cylinder reconditioning
  • Journal repairs
  • Bearer changes
  • Dynamic balancing

 

 Journal Repairs  Maybe you don’t need to repair the whole cylinder? 

Over time, journal diameters can wear and cause a reduction in production quality and efficiency.

Sometimes plate or blanket cylinders require complete reconditioning, but sometimes a simple repair to the journal, or a re-stubbing of journals may be all it takes to keep your press running effectively.

The cost of repairing a journal, versus replacing or reconditioning an entire cylinder equals reduced maintenance costs.

Replacing and repairing journals has been an important part of how we save money for our customers every day.

Let HFW help you find ways to minimize your repair costs, while maximizing production!

 

  HFW Industries, Inc.

ISO 9001:2008 Registered

196 Philadelphia Street

Buffalo, New York 14207-0008

Ph: 716.875.3380

Fx: 716.875.3385

E-mail: sales@hfwindustries.com

 

High quality print is imperative in today’s environment. The cost of scrap and press downtime due to poor quality can cost you money or even a customer!

For over 40 years, HFW Industries has worked with offset-web press OEMs, rebuilders and print facilities to keep production running profitably by repairing press cylinders. Better running cylinders equals better running presses.

 

It all starts with a detailed inspection of your worn cylinders to determine the work scope involved. See below for details…

 

 Going from worn to new

Every print cylinder that comes into HFW for reconditioning goes through the exact process outlined below, resulting in the same outcome – highly satisfied customers!

Step 1: Detailed Inspection

  • Disassembly and cleaning
  • Preliminary inspection of cylinder
  • Received condition (Diameter, TIR and surface condition)
  • Review parts for condition

Step 2: Engineered Services Manager Review

  • Analyze condition and establish work scope
  • Review with customer (If desired)
  • Prepare quotation (Or work scope summary)
  • Submit to customer

Step 3: Customer Approval

  • We will not initiate work until our customer fully approves and understands the work scope entailed

Step 4: Remanufacture

  • Prepare for coating
  • Establish Duragap® protective edge (If desired)
  • Thermal spray (Via metallize, plasma spray, or HVOF processes)
  • Proof finish
  • Precision machine slot (gap) to required width and radii
  • Dynamic balance and make necessary weight corrections (If required)
  • Assemble and install new bearers, bearings, and component parts
  • Finish grind to specifications
  • Final assembly
  • Inspection / documentation
  • Packaging

 

To learn more, please visit us at www.reconditionedprintcylinders.com.

Sincerely,

Matt Watson, Vice President- mwatson@hfwindustries.com

Ron Jurewicz, Manufacturing Mgr.- rjurewicz@hfwindustries.com